- Right-click on get-pip.py and choose Saves as...

- Run "python2 get-pip.py" in the folder where you downloaded get-pip.py (may require admin access).

.. note::

   See http://stackoverflow.com/questions/4750806/how-to-install-pip-on-windows

   for details and alternative methods.

Note that pip.exe will be placed inside your Python installation's

Scripts folder, which is likely not on your path. To correct this,

open a CMD and type::

  SETX PATH "%PATH%;[your-python-path]\Scripts" /M

Step 5 -- Kallithea folder structure

^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Create a Kallithea folder structure.

This is only an example to install Kallithea. Of course, you can

change it. However, this guide will follow the proposed structure, so

please later adapt the paths if you change them. Folders without

spaces are recommended.

Create the following folder structure::

  C:\Kallithea

  C:\Kallithea\Bin

  C:\Kallithea\Env

  C:\Kallithea\Repos

Step 6 -- Install virtualenv

^^^^^^^^^^^^^^^^^^^^^^^^^^^^

.. note::

   A python virtual environment will allow for isolation between the Python packages of your system and those used for Kallithea.

   It is strongly recommended to use it to ensure that Kallithea does not change a dependency that other software uses or vice versa.

In a command prompt type::

  pip install virtualenv

Virtualenv will now be inside your Python Scripts path (C:\\Python27\\Scripts or similar).

To create a virtual environment, run::

  virtualenv C:\Kallithea\Env

Step 7 -- Install Kallithea

^^^^^^^^^^^^^^^^^^^^^^^^^^^

In order to install Kallithea, you need to be able to run "pip install kallithea". It will use pip to install the Kallithea Python package and its dependencies.

Some Python packages use managed code and need to be compiled.

This can be done on Linux without any special steps. On Windows, you will need to install Microsoft Visual C++ compiler for Python 2.7.

Download and install "Microsoft Visual C++ Compiler for Python 2.7" from http://aka.ms/vcpython27

.. note::

  You can also install the dependencies using already compiled Windows binaries packages. A good source of compiled Python packages is http://www.lfd.uci.edu/~gohlke/pythonlibs/. However, not all of the necessary packages for Kallithea are on this site and some are hard to find, so we will stick with using the compiler.

In a command prompt type (adapting paths if necessary)::

  cd C:\Kallithea\Env\Scripts

  activate

  pip install --upgrade pip setuptools

The prompt will change into "(Env) C:\\Kallithea\\Env\\Scripts" or similar

(depending of your folder structure). Then type::

  pip install kallithea

.. note:: This will take some time. Please wait patiently until it is fully

          complete. Some warnings will appear. Don't worry, they are

          normal.

Step 8 -- Install Git (optional)

^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Mercurial being a python package, was installed automatically when doing ``pip install kallithea``.

You need to install Git manually if you want Kallithea to be able to host Git repositories.

See http://git-scm.com/book/en/v2/Getting-Started-Installing-Git#Installing-on-Windows for instructions.

The location of the Git binaries (like ``c:\path\to\git\bin``) must be

added to the ``PATH`` environment variable so ``git.exe`` and other tools like

``gzip.exe`` are available.

Step 9 -- Configuring Kallithea

^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Steps taken from `<setup.html>`_

You have to use the same command prompt as in Step 7, so if you closed

it, reopen it following the same commands (including the "activate"

one). When ready, type::

  cd C:\Kallithea\Bin

port, mail settings, database, etc.). `NotePad++`__ or a similar text

editor is recommended to properly handle the newline character

differences between Unix and Windows.

__ http://notepad-plus-plus.org/

For the sake of simplicity, run it with the default settings. After your edits (if any) in the previous command prompt, type::

.. warning:: This time a *new* database will be installed. You must

             follow a different process to later :ref:`upgrade <upgrade>`

             to a newer Kallithea version.

The script will ask you for confirmation about creating a new database, answer yes (y)

The script will ask you for the repository path, answer C:\\Kallithea\\Repos (or similar).

The script will ask you for the admin username and password, answer "admin" + "123456" (or whatever you want)

The script will ask you for admin mail, answer "admin@xxxx.com" (or whatever you want).

If you make a mistake and the script doesn't end, don't worry: start it again.

If you decided not to install Git, you will get errors about it that you can ignore.

Step 10 -- Running Kallithea

^^^^^^^^^^^^^^^^^^^^^^^^^^^^

In the previous command prompt, being in the C:\\Kallithea\\Bin folder, type::

Open your web server, and go to http://127.0.0.1:5000

It works!! :-)

Remark:

If it does not work the first time, Ctrl-C the CMD process and start it again. Don't forget the "http://" in Internet Explorer.

What this guide does not cover:

- Installing Celery

- Running Kallithea as a Windows Service. You can investigate here:

  - http://pypi.python.org/pypi/wsgisvc

  - http://ryrobes.com/python/running-python-scripts-as-a-windows-service/

  - http://wiki.pylonshq.com/display/pylonscookbook/How+to+run+Pylons+as+a+Windows+service

- Using Apache. You can investigate here:

  - https://groups.google.com/group/rhodecode/msg/c433074e813ffdc4

  Close CMD (the path variable will be updated then)

- Using support tools on WINDOWS Vista/7:

  Open a CMD and type::

    SETX PATH "%PATH%;[your-python-path]" /M

  Please substitute [your-python-path] with your Python installation path.

  Typically: C:\\Python27

Step 5 -- Kallithea folder structure

^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Create a Kallithea folder structure

This is only a example to install Kallithea, you can of course change

it. However, this guide will follow the proposed structure, so please

later adapt the paths if you change them. My recommendation is to use

folders with NO SPACES. But you can try if you are brave...

Create the following folder structure::

  C:\Kallithea

  C:\Kallithea\Bin

  C:\Kallithea\Env

  C:\Kallithea\Repos

Step 6 -- Install virtualenv

^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Install Virtual Env for Python

Navigate to: http://www.virtualenv.org/en/latest/index.html#installation

Right click on "virtualenv.py" file and choose "Save link as...".

Download to C:\\Kallithea (or whatever you want)

(the file is located at

https://raw.github.com/pypa/virtualenv/master/virtualenv.py)

Create a virtual Python environment in C:\\Kallithea\\Env (or similar). To

do so, open a CMD (Python Path should be included in Step3), navigate

where you downloaded "virtualenv.py", and write::

  python2 virtualenv.py C:\Kallithea\Env

(--no-site-packages is now the default behaviour of virtualenv, no need

to include it)

Step 7 -- Install Kallithea

^^^^^^^^^^^^^^^^^^^^^^^^^^^

Finally, install Kallithea

Close previously opened command prompt/s, and open a Visual Studio 2008

Command Prompt (**IMPORTANT!!**). To do so, go to Start Menu, and then open

"Microsoft Visual C++ 2008 Express Edition" -> "Visual Studio Tools" ->

"Visual Studio 2008 Command Prompt"

.. note::

   64-bit: For 64-bit you need to modify the shortcut that is used to start the

   Visual Studio 2008 Command Prompt. Use right-mouse click to open properties.

Change commandline from::

%comspec% /k ""C:\Program Files (x86)\Microsoft Visual Studio 9.0\VC\vcvarsall.bat"" x86

to::

%comspec% /k ""C:\Program Files (x86)\Microsoft Visual Studio 9.0\VC\vcvarsall.bat"" amd64

In that CMD (loaded with VS2008 PATHs) type::

  cd C:\Kallithea\Env\Scripts (or similar)

  activate

  pip install --upgrade pip setuptools

The prompt will change into "(Env) C:\\Kallithea\\Env\\Scripts" or similar

(depending of your folder structure). Then type::

 pip install kallithea

(long step, please wait until fully complete)

Some warnings will appear, don't worry as they are normal.

Step 8 -- Configuring Kallithea

^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

steps taken from http://packages.python.org/Kallithea/setup.html

You have to use the same Visual Studio 2008 command prompt as Step7, so

if you closed it reopen it following the same commands (including the

"activate" one). When ready, just type::

  cd C:\Kallithea\Bin

port, mail settings, database, whatever). I recommend using NotePad++

(free) or similar text editor, as it handles well the EndOfLine

character differences between Unix and Windows

(http://notepad-plus-plus.org/)

For the sake of simplicity lets run it with the default settings. After

your edits (if any), in the previous Command Prompt, type::

.. warning:: This time a *new* database will be installed. You must

             follow a different process to later :ref:`upgrade <upgrade>`

             to a newer Kallithea version.

The script will ask you for confirmation about creating a NEW database,

answer yes (y)

The script will ask you for repository path, answer C:\\Kallithea\\Repos

(or similar)

The script will ask you for admin username and password, answer "admin"

+ "123456" (or whatever you want)

The script will ask you for admin mail, answer "admin@xxxx.com" (or

whatever you want)

If you make some mistake and the script does not end, don't worry, start

it again.

Step 9 -- Running Kallithea

^^^^^^^^^^^^^^^^^^^^^^^^^^^

In the previous command prompt, being in the C:\\Kallithea\\Bin folder,

just type::

Open yout web server, and go to http://127.0.0.1:5000

It works!! :-)

Remark:

If it does not work first time, just Ctrl-C the CMD process and start it

again. Don't forget the "http://" in Internet Explorer

What this Guide does not cover:

- Installing Celery

- Running Kallithea as Windows Service. You can investigate here:

  - http://pypi.python.org/pypi/wsgisvc

  - http://ryrobes.com/python/running-python-scripts-as-a-windows-service/

  - http://wiki.pylonshq.com/display/pylonscookbook/How+to+run+Pylons+as+a+Windows+service

- Using Apache. You can investigate here:

  - https://groups.google.com/group/rhodecode/msg/c433074e813ffdc4

This will cause the text ``#300`` to be transformed into a link:

.. code-block:: html

  <a href="https://issues.example.com/example_repo/issue/300">#300</a>

The following example transforms a text starting with either of 'pullrequest',

'pull request' or 'PR', followed by an optional space, then a pound character

(#) and one or more digits, into a link with the text 'PR #' followed by the

digits::

    issue_pat = (pullrequest|pull request|PR) ?#(\d+)

    issue_server_link = https://issues.example.com/\2

    issue_sub = PR #\2

The following example demonstrates how to require whitespace before the issue

reference in order for it to be recognized, such that the text ``issue#123`` will

not cause a match, but ``issue #123`` will::

    issue_pat = (?:^|(?<=\s))#(\d+)

    issue_server_link = https://issues.example.com/\1

    issue_sub =

If needed, more than one pattern can be specified by appending a unique suffix to

the variables. For example, also demonstrating the use of named groups::

    issue_pat_wiki = wiki-(?P<pagename>\S+)

    issue_server_link_wiki = https://wiki.example.com/\g<pagename>

    issue_sub_wiki = WIKI-\g<pagename>

With these settings, wiki pages can be referenced as wiki-some-id, and every

such reference will be transformed into:

.. code-block:: html

  <a href="https://wiki.example.com/some-id">WIKI-some-id</a>

Refer to the `Python regular expression documentation`_ for more details about

the supported syntax in ``issue_pat``, ``issue_server_link`` and ``issue_sub``.

Hook management

---------------

Hooks can be managed in similar way to that used in ``.hgrc`` files.

To manage hooks, choose *Admin > Settings > Hooks*.

The built-in hooks cannot be modified, though they can be enabled or disabled in the *VCS* section.

To add another custom hook simply fill in the first textbox with

``<name>.<hook_type>`` and the second with the hook path. Example hooks

can be found in ``kallithea.lib.hooks``.

Changing default encoding

-------------------------

By default, Kallithea uses UTF-8 encoding.

This is configurable as ``default_encoding`` in the .ini file.

This affects many parts in Kallithea including user names, filenames, and

encoding of commit messages. In addition Kallithea can detect if the ``chardet``

library is installed. If ``chardet`` is detected Kallithea will fallback to it

when there are encode/decode errors.

The Mercurial encoding is configurable as ``hgencoding``. It is similar to

setting the ``HGENCODING`` environment variable, but will override it.

Celery configuration

--------------------

Kallithea can use the distributed task queue system Celery_ to run tasks like

cloning repositories or sending emails.

Kallithea will in most setups work perfectly fine out of the box (without

Celery), executing all tasks in the web server process. Some tasks can however

take some time to run and it can be better to run such tasks asynchronously in

a separate process so the web server can focus on serving web requests.

For installation and configuration of Celery, see the `Celery documentation`_.

Note that Celery requires a message broker service like RabbitMQ_ (recommended)

or Redis_.

The use of Celery is configured in the Kallithea ini configuration file.

To enable it, simply set::

  use_celery = true

and add or change the ``celery.*`` and ``broker.*`` configuration variables.

Remember that the ini files use the format with '.' and not with '_' like

Celery. So for example setting `BROKER_HOST` in Celery means setting

`broker.host` in the configuration file.

To start the Celery process, run::

Extra options to the Celery worker can be passed after ``--`` - see ``-- -h``

for more info.

.. note::

   Make sure you run this command from the same virtualenv, and with the same

   user that Kallithea runs.

HTTPS support

-------------

Kallithea will by default generate URLs based on the WSGI environment.

Alternatively, you can use some special configuration settings to control

directly which scheme/protocol Kallithea will use when generating URLs:

- With ``https_fixup = true``, the scheme will be taken from the

  ``X-Url-Scheme``, ``X-Forwarded-Scheme`` or ``X-Forwarded-Proto`` HTTP header

  (default ``http``).

- With ``force_https = true`` the default will be ``https``.

- With ``use_htsts = true``, Kallithea will set ``Strict-Transport-Security`` when using https.

.. _nginx_virtual_host:

Nginx virtual host example

--------------------------

Sample config for Nginx using proxy:

.. code-block:: nginx

    upstream kallithea {

        server 127.0.0.1:5000;

        # add more instances for load balancing

        #server 127.0.0.1:5001;

        #server 127.0.0.1:5002;

    }

    ## gist alias

    server {

       listen          443;

       server_name     gist.example.com;

       access_log      /var/log/nginx/gist.access.log;

       error_log       /var/log/nginx/gist.error.log;

       ssl on;

       ssl_certificate     gist.your.kallithea.server.crt;

       ssl_certificate_key gist.your.kallithea.server.key;

       ssl_session_timeout 5m;

       ssl_protocols SSLv3 TLSv1;

       ssl_ciphers DHE-RSA-AES256-SHA:DHE-RSA-AES128-SHA:EDH-RSA-DES-CBC3-SHA:AES256-SHA:DES-CBC3-SHA:AES128-SHA:RC4-SHA:RC4-MD5;

       ssl_prefer_server_ciphers on;

       rewrite ^/(.+)$ https://kallithea.example.com/_admin/gists/$1;

       rewrite (.*)    https://kallithea.example.com/_admin/gists;

    }

    server {

       listen          443;

       server_name     kallithea.example.com

       access_log      /var/log/nginx/kallithea.access.log;

       error_log       /var/log/nginx/kallithea.error.log;

       ssl on;

       ssl_certificate     your.kallithea.server.crt;

       ssl_certificate_key your.kallithea.server.key;

       ssl_session_timeout 5m;

       ssl_protocols SSLv3 TLSv1;

       ssl_ciphers DHE-RSA-AES256-SHA:DHE-RSA-AES128-SHA:EDH-RSA-DES-CBC3-SHA:AES256-SHA:DES-CBC3-SHA:AES128-SHA:RC4-SHA:RC4-MD5;

       ssl_prefer_server_ciphers on;

       ## uncomment root directive if you want to serve static files by nginx

       ## requires static_files = false in .ini file

       #root /srv/kallithea/kallithea/kallithea/public;

       include         /etc/nginx/proxy.conf;

       location / {

            try_files $uri @kallithea;

       }

       location @kallithea {

            proxy_pass      http://127.0.0.1:5000;

       }

    }

Here's the proxy.conf. It's tuned so it will not timeout on long

pushes or large pushes::

    proxy_redirect              off;

    proxy_set_header            Host $host;