When these authentication methods are enabled in Kallithea, it uses the

username that the container/proxy (Apache or Nginx, etc.) provides and doesn't

perform the authentication itself. The authorization, however, is still done by

Kallithea according to its settings.

When a user logs in for the first time using these authentication methods,

a matching user account is created in Kallithea with default permissions. An

administrator can then modify it using Kallithea's admin interface.

It's also possible for an administrator to create accounts and configure their

permissions before the user logs in for the first time, using the :ref:`create-user` API.

Container-based authentication

''''''''''''''''''''''''''''''

In a container-based authentication setup, Kallithea reads the user name from

the ``REMOTE_USER`` server variable provided by the WSGI container.

After setting up your container (see `Apache with mod_wsgi`_), you'll need

to configure it to require authentication on the location configured for

Kallithea.

Proxy pass-through authentication

'''''''''''''''''''''''''''''''''

In a proxy pass-through authentication setup, Kallithea reads the user name

from the ``X-Forwarded-User`` request header, which should be configured to be

sent by the reverse-proxy server.

After setting up your proxy solution (see `Apache virtual host reverse proxy example`_,

`Apache as subdirectory`_ or `Nginx virtual host example`_), you'll need to

configure the authentication and add the username in a request header named

``X-Forwarded-User``.

For example, the following config section for Apache sets a subdirectory in a

reverse-proxy setup with basic auth:

.. code-block:: apache

    <Location /someprefix>

      ProxyPass http://127.0.0.1:5000/someprefix

      ProxyPassReverse http://127.0.0.1:5000/someprefix

      SetEnvIf X-Url-Scheme https HTTPS=1

      AuthType Basic

      AuthName "Kallithea authentication"

      AuthUserFile /srv/kallithea/.htpasswd

      Require valid-user

      RequestHeader unset X-Forwarded-User

      RewriteEngine On

      RewriteCond %{LA-U:REMOTE_USER} (.+)

      RewriteRule .* - [E=RU:%1]

      RequestHeader set X-Forwarded-User %{RU}e

    </Location>

.. note::

   If you enable proxy pass-through authentication, make sure your server is

   only accessible through the proxy. Otherwise, any client would be able to

   forge the authentication header and could effectively become authenticated

   using any account of their liking.

Integration with issue trackers

-------------------------------

Kallithea provides a simple integration with issue trackers. It's possible

to define a regular expression that will match an issue ID in commit messages,

and have that replaced with a URL to the issue. To enable this simply

uncomment the following variables in the ini file::

    issue_pat = (?:^#|\s#)(\w+)

    issue_server_link = https://issues.example.com/{repo}/issue/{id}

    issue_prefix = #

``issue_pat`` is the regular expression describing which strings in

commit messages will be treated as issue references. A match group in

parentheses should be used to specify the actual issue id.

The default expression matches issues in the format ``#<number>``, e.g., ``#300``.

Matched issue references are replaced with the link specified in

``issue_server_link``. ``{id}`` is replaced with the issue ID, and

``{repo}`` with the repository name.  Since the # is stripped away,

``issue_prefix`` is prepended to the link text.  ``issue_prefix`` doesn't

necessarily need to be ``#``: if you set issue prefix to ``ISSUE-`` this will

generate a URL in the format:

.. code-block:: html

  <a href="https://issues.example.com/example_repo/issue/300">ISSUE-300</a>

If needed, more than one pattern can be specified by appending a unique suffix to

the variables. For example::

    issue_pat_wiki = (?:wiki-)(.+)

    issue_server_link_wiki = https://wiki.example.com/{id}

    issue_prefix_wiki = WIKI-

With these settings, wiki pages can be referenced as wiki-some-id, and every

such reference will be transformed into:

.. code-block:: html

  <a href="https://wiki.example.com/some-id">WIKI-some-id</a>

Hook management

---------------

Hooks can be managed in similar way to that used in ``.hgrc`` files.

To manage hooks, choose *Admin > Settings > Hooks*.

The built-in hooks cannot be modified, though they can be enabled or disabled in the *VCS* section.

To add another custom hook simply fill in the first textbox with

``<name>.<hook_type>`` and the second with the hook path. Example hooks

can be found in ``kallithea.lib.hooks``.

Changing default encoding

-------------------------

By default, Kallithea uses UTF-8 encoding.

This is configurable as ``default_encoding`` in the .ini file.

This affects many parts in Kallithea including user names, filenames, and

encoding of commit messages. In addition Kallithea can detect if the ``chardet``

library is installed. If ``chardet`` is detected Kallithea will fallback to it

when there are encode/decode errors.

Celery configuration

--------------------

Kallithea can use the distributed task queue system Celery_ to run tasks like

cloning repositories or sending emails.

Kallithea will in most setups work perfectly fine out of the box (without

Celery), executing all tasks in the web server process. Some tasks can however

take some time to run and it can be better to run such tasks asynchronously in

a separate process so the web server can focus on serving web requests.

For installation and configuration of Celery, see the `Celery documentation`_.

Note that Celery requires a message broker service like RabbitMQ_ (recommended)

or Redis_.

The use of Celery is configured in the Kallithea ini configuration file.

To enable it, simply set::

  use_celery = true

and add or change the ``celery.*`` and ``broker.*`` configuration variables.

Remember that the ini files use the format with '.' and not with '_' like

Celery. So for example setting `BROKER_HOST` in Celery means setting

`broker.host` in the configuration file.

To start the Celery process, run::

 paster celeryd <configfile.ini>

.. note::

   Make sure you run this command from the same virtualenv, and with the same

   user that Kallithea runs.

HTTPS support

-------------

Kallithea will by default generate URLs based on the WSGI environment.

Alternatively, you can use some special configuration settings to control

directly which scheme/protocol Kallithea will use when generating URLs:

- With ``https_fixup = true``, the scheme will be taken from the

  ``X-Url-Scheme``, ``X-Forwarded-Scheme`` or ``X-Forwarded-Proto`` HTTP header

  (default ``http``).

- With ``force_https = true`` the default will be ``https``.

- With ``use_htsts = true``, Kallithea will set ``Strict-Transport-Security`` when using https.

Nginx virtual host example

--------------------------

Sample config for Nginx using proxy:

.. code-block:: nginx

    upstream kallithea {

        server 127.0.0.1:5000;

        # add more instances for load balancing

        #server 127.0.0.1:5001;

        #server 127.0.0.1:5002;

    }

    ## gist alias

    server {

       listen          443;

       server_name     gist.example.com;

       access_log      /var/log/nginx/gist.access.log;

       error_log       /var/log/nginx/gist.error.log;

       ssl on;

       ssl_certificate     gist.your.kallithea.server.crt;

       ssl_certificate_key gist.your.kallithea.server.key;

       ssl_session_timeout 5m;

       ssl_protocols SSLv3 TLSv1;

       ssl_ciphers DHE-RSA-AES256-SHA:DHE-RSA-AES128-SHA:EDH-RSA-DES-CBC3-SHA:AES256-SHA:DES-CBC3-SHA:AES128-SHA:RC4-SHA:RC4-MD5;

       ssl_prefer_server_ciphers on;

       rewrite ^/(.+)$ https://kallithea.example.com/_admin/gists/$1;

       rewrite (.*)    https://kallithea.example.com/_admin/gists;

    }

    server {

       listen          443;

       server_name     kallithea.example.com

       access_log      /var/log/nginx/kallithea.access.log;

       error_log       /var/log/nginx/kallithea.error.log;

       ssl on;

       ssl_certificate     your.kallithea.server.crt;

       ssl_certificate_key your.kallithea.server.key;

       ssl_session_timeout 5m;

       ssl_protocols SSLv3 TLSv1;

       ssl_ciphers DHE-RSA-AES256-SHA:DHE-RSA-AES128-SHA:EDH-RSA-DES-CBC3-SHA:AES256-SHA:DES-CBC3-SHA:AES128-SHA:RC4-SHA:RC4-MD5;

       ssl_prefer_server_ciphers on;

       ## uncomment root directive if you want to serve static files by nginx

       ## requires static_files = false in .ini file

       #root /path/to/installation/kallithea/public;

       include         /etc/nginx/proxy.conf;

       location / {

            try_files $uri @kallithea;

       }

       location @kallithea {

            proxy_pass      http://127.0.0.1:5000;

       }

    }

Here's the proxy.conf. It's tuned so it will not timeout on long

pushes or large pushes::

    proxy_redirect              off;

    proxy_set_header            Host $host;

    ## needed for container auth

    #proxy_set_header            REMOTE_USER $remote_user;

    #proxy_set_header            X-Forwarded-User $remote_user;

    proxy_set_header            X-Url-Scheme $scheme;

    proxy_set_header            X-Host $http_host;

    proxy_set_header            X-Real-IP $remote_addr;

    proxy_set_header            X-Forwarded-For $proxy_add_x_forwarded_for;

    proxy_set_header            Proxy-host $proxy_host;

    proxy_buffering             off;

    proxy_connect_timeout       7200;

    proxy_send_timeout          7200;

    proxy_read_timeout          7200;

    proxy_buffers               8 32k;

    client_max_body_size        1024m;

    client_body_buffer_size     128k;

    large_client_header_buffers 8 64k;

Apache virtual host reverse proxy example

-----------------------------------------

Here is a sample configuration file for Apache using proxy:

.. code-block:: apache

    <VirtualHost *:80>

            ServerName kallithea.example.com

            <Proxy *>

              # For Apache 2.4 and later:

              Require all granted

              # For Apache 2.2 and earlier, instead use:

              # Order allow,deny

              # Allow from all

            </Proxy>

            #important !

            #Directive to properly generate url (clone url) for pylons

            ProxyPreserveHost On

            #kallithea instance

            ProxyPass / http://127.0.0.1:5000/

            ProxyPassReverse / http://127.0.0.1:5000/

            #to enable https use line below

            #SetEnvIf X-Url-Scheme https HTTPS=1

    </VirtualHost>

Additional tutorial

http://pylonsbook.com/en/1.1/deployment.html#using-apache-to-proxy-requests-to-pylons

Apache as subdirectory

----------------------

Apache subdirectory part:

.. code-block:: apache

    <Location /<someprefix> >

      ProxyPass http://127.0.0.1:5000/<someprefix>

      ProxyPassReverse http://127.0.0.1:5000/<someprefix>

      SetEnvIf X-Url-Scheme https HTTPS=1

    </Location>

Besides the regular apache setup you will need to add the following line

into ``[app:main]`` section of your .ini file::

    filter-with = proxy-prefix

Add the following at the end of the .ini file::

    [filter:proxy-prefix]

    use = egg:PasteDeploy#prefix

    prefix = /<someprefix>

then change ``<someprefix>`` into your chosen prefix

Apache with mod_wsgi

--------------------

Alternatively, Kallithea can be set up with Apache under mod_wsgi. For

that, you'll need to:

- Install mod_wsgi. If using a Debian-based distro, you can install

  the package libapache2-mod-wsgi::

    aptitude install libapache2-mod-wsgi

- Enable mod_wsgi::

    a2enmod wsgi

- Add global Apache configuration to tell mod_wsgi that Python only will be

  used in the WSGI processes and shouldn't be initialized in the Apache

  processes::

    WSGIRestrictEmbedded On

- Create a wsgi dispatch script, like the one below. Make sure you

  check that the paths correctly point to where you installed Kallithea

  and its Python Virtual Environment.

- Enable the ``WSGIScriptAlias`` directive for the WSGI dispatch script,

  as in the following example. Once again, check the paths are

  correctly specified.

Here is a sample excerpt from an Apache Virtual Host configuration file:

.. code-block:: apache

    WSGIDaemonProcess kallithea \

        threads=4 \

        python-home=/srv/kallithea/venv

    WSGIProcessGroup kallithea

    WSGIScriptAlias / /srv/kallithea/dispatch.wsgi

    WSGIPassAuthorization On

Or if using a dispatcher WSGI script with proper virtualenv activation:

.. code-block:: apache

    WSGIDaemonProcess kallithea threads=4

    WSGIProcessGroup kallithea

    WSGIScriptAlias / /srv/kallithea/dispatch.wsgi

    WSGIPassAuthorization On

Apache will by default run as a special Apache user, on Linux systems

usually ``www-data`` or ``apache``. If you need to have the repositories

directory owned by a different user, use the user and group options to

.. note::

   If running Kallithea in multiprocess mode,

   make sure you set ``instance_id = *`` in the configuration so each process

   gets it's own cache invalidation key.

Example WSGI dispatch script:

.. code-block:: python

    import os

    os.environ["HGENCODING"] = "UTF-8"

    os.environ['PYTHON_EGG_CACHE'] = '/srv/kallithea/.egg-cache'

    # sometimes it's needed to set the curent dir

    os.chdir('/srv/kallithea/')

    import site

    site.addsitedir("/srv/kallithea/venv/lib/python2.7/site-packages")

    ini = '/srv/kallithea/my.ini'

    from paste.script.util.logging_config import fileConfig

    fileConfig(ini)

    from paste.deploy import loadapp

    application = loadapp('config:' + ini)

Or using proper virtualenv activation:

.. code-block:: python

    activate_this = '/srv/kallithea/venv/bin/activate_this.py'

    execfile(activate_this, dict(__file__=activate_this))

    import os

    os.environ['HOME'] = '/srv/kallithea'

    ini = '/srv/kallithea/kallithea.ini'

    from paste.script.util.logging_config import fileConfig

    fileConfig(ini)

    from paste.deploy import loadapp

    application = loadapp('config:' + ini)

Other configuration files

-------------------------

A number of `example init.d scripts`__ can be found in

the ``init.d`` directory of the Kallithea source.

.. __: https://kallithea-scm.org/repos/kallithea/files/tip/init.d/ .

.. _virtualenv: http://pypi.python.org/pypi/virtualenv

.. _python: http://www.python.org/

.. _Mercurial: http://mercurial.selenic.com/

.. _Celery: http://celeryproject.org/

.. _Celery documentation: http://docs.celeryproject.org/en/latest/getting-started/index.html

.. _RabbitMQ: http://www.rabbitmq.com/

.. _Redis: http://redis.io/

.. _python-ldap: http://www.python-ldap.org/

.. _mercurial-server: http://www.lshift.net/mercurial-server.html

.. _PublishingRepositories: http://mercurial.selenic.com/wiki/PublishingRepositories