.. _setup:

=====

Setup

=====

Setting up RhodeCode

--------------------

First, you will need to create a RhodeCode configuration file. Run the 

following command to do this::

    paster make-config RhodeCode production.ini

- This will create the file `production.ini` in the current directory. This

  configuration file contains the various settings for RhodeCode, e.g proxy 

  port, email settings, usage of static files, cache, celery settings and 

  logging.

Next, you need to create the databases used by RhodeCode. I recommend that you

use postgresql or sqlite (default). If you choose a database other than the

default ensure you properly adjust the db url in your production.ini

configuration file to use this other database. RhodeCode currently supports

postgresql, sqlite and mysql databases. Create the database by running

the following command::

    paster setup-rhodecode production.ini

This will prompt you for a "root" path. This "root" path is the location where

RhodeCode will store all of its repositories on the current machine. After

entering this "root" path ``setup-rhodecode`` will also prompt you for a username 

and password for the initial admin account which ``setup-rhodecode`` sets 

up for you.

setup process can be fully automated, example for lazy::

    paster setup-rhodecode production.ini --user=marcink --password=secret --email=marcin@rhodecode.org --repos=/home/marcink/my_repos

- The ``setup-rhodecode`` command will create all of the needed tables and an 

  admin account. When choosing a root path you can either use a new empty 

  location, or a location which already contains existing repositories. If you

  choose a location which contains existing repositories RhodeCode will simply 

  add all of the repositories at the chosen location to it's database. 

  (Note: make sure you specify the correct path to the root).

- Note: the given path for mercurial_ repositories **must** be write accessible

  for the application. It's very important since the RhodeCode web interface 

  will work without write access, but when trying to do a push it will 

  eventually fail with permission denied errors unless it has write access.

You are now ready to use RhodeCode, to run it simply execute::

    paster serve production.ini

- This command runs the RhodeCode server. The web app should be available at the 

  127.0.0.1:5000. This ip and port is configurable via the production.ini 

  file created in previous step

- Use the admin account you created above when running ``setup-rhodecode`` 

  to login to the web app.

- The default permissions on each repository is read, and the owner is admin. 

  Remember to update these if needed.

- In the admin panel you can toggle ldap, anonymous, permissions settings. As

  well as edit more advanced options on users and repositories

Optionally users can create `rcextensions` package that extends RhodeCode

functionality. To do this simply execute::

    paster make-rcext production.ini

This will create `rcextensions` package in the same place that your `ini` file

lives. With `rcextensions` it's possible to add additional mapping for whoosh, 

Please see the `__init__.py` file inside `rcextensions` package 

for more details.

Using RhodeCode with SSH

------------------------

RhodeCode currently only hosts repositories using http and https. (The addition

of ssh hosting is a planned future feature.) However you can easily use ssh in

parallel with RhodeCode. (Repository access via ssh is a standard "out of

the box" feature of mercurial_ and you can use this to access any of the

repositories that RhodeCode is hosting. See PublishingRepositories_)

RhodeCode repository structures are kept in directories with the same name 

as the project. When using repository groups, each group is a subdirectory.

This allows you to easily use ssh for accessing repositories.

In order to use ssh you need to make sure that your web-server and the users 

login accounts have the correct permissions set on the appropriate directories.

(Note that these permissions are independent of any permissions you have set up

using the RhodeCode web interface.)

If your main directory (the same as set in RhodeCode settings) is for example

set to **/home/hg** and the repository you are using is named `rhodecode`, then

to clone via ssh you should run::

    hg clone ssh://user@server.com/home/hg/rhodecode

Using other external tools such as mercurial-server_ or using ssh key based

authentication is fully supported.

Note: In an advanced setup, in order for your ssh access to use the same

permissions as set up via the RhodeCode web interface, you can create an

authentication hook to connect to the rhodecode db and runs check functions for

permissions against that.

Setting up Whoosh full text search

----------------------------------

Starting from version 1.1 the whoosh index can be build by using the paster

command ``make-index``. To use ``make-index`` you must specify the configuration

file that stores the location of the index. You may specify the location of the 

repositories (`--repo-location`).  If not specified, this value is retrieved 

from the RhodeCode database.  This was required prior to 1.2.  Starting from 

version 1.2 it is also possible to specify a comma separated list of 

repositories (`--index-only`) to build index only on chooses repositories 

skipping any other found in repos location

You may optionally pass the option `-f` to enable a full index rebuild. Without

the `-f` option, indexing will run always in "incremental" mode.

For an incremental index build use::

	paster make-index production.ini 

For a full index rebuild use::

	paster make-index production.ini -f 

building index just for chosen repositories is possible with such command::

 paster make-index production.ini --index-only=vcs,rhodecode

In order to do periodical index builds and keep your index always up to date.

It's recommended to do a crontab entry for incremental indexing. 

An example entry might look like this::

    /path/to/python/bin/paster make-index /path/to/rhodecode/production.ini 

When using incremental mode (the default) whoosh will check the last

modification date of each file and add it to be reindexed if a newer file is

available. The indexing daemon checks for any removed files and removes them

from index.

If you want to rebuild index from scratch, you can use the `-f` flag as above,

or in the admin panel you can check `build from scratch` flag.

Setting up LDAP support

-----------------------

RhodeCode starting from version 1.1 supports ldap authentication. In order

to use LDAP, you have to install the python-ldap_ package. This package is 

available via pypi, so you can install it by running

using easy_install::

    easy_install python-ldap

using pip::

    pip install python-ldap

.. note::

   python-ldap requires some certain libs on your system, so before installing 

   it check that you have at least `openldap`, and `sasl` libraries.

LDAP settings are located in admin->ldap section,

Here's a typical ldap setup::

 Connection settings

 Enable LDAP          = checked

 Host                 = host.example.org

 Port                 = 389

 Account              = <account>

 Password             = <password>

 Connection Security  = LDAPS connection

 Certificate Checks   = DEMAND

 Search settings

 Base DN              = CN=users,DC=host,DC=example,DC=org

 LDAP Filter          = (&(objectClass=user)(!(objectClass=computer)))

 LDAP Search Scope    = SUBTREE

 Attribute mappings

 Login Attribute      = uid

 First Name Attribute = firstName

 Last Name Attribute  = lastName

 E-mail Attribute     = mail

.. _enable_ldap:

Enable LDAP : required

    Whether to use LDAP for authenticating users.

.. _ldap_host:

Host : required

    LDAP server hostname or IP address.

.. _Port:

Port : required

    389 for un-encrypted LDAP, 636 for SSL-encrypted LDAP.

.. _ldap_account:

Account : optional

    Only required if the LDAP server does not allow anonymous browsing of

    records.  This should be a special account for record browsing.  This

    will require `LDAP Password`_ below.

.. _LDAP Password:

Password : optional

    Only required if the LDAP server does not allow anonymous browsing of

    records.

.. _Enable LDAPS:

Connection Security : required

    Defines the connection to LDAP server

    No encryption

        Plain non encrypted connection

    LDAPS connection

        Enable ldaps connection. It will likely require `Port`_ to be set to 

        a different value (standard LDAPS port is 636). When LDAPS is enabled 

        then `Certificate Checks`_ is required.

    START_TLS on LDAP connection

        START TLS connection

.. _Certificate Checks:

Certificate Checks : optional

    How SSL certificates verification is handled - this is only useful when

    `Enable LDAPS`_ is enabled.  Only DEMAND or HARD offer full SSL security 

    while the other options are susceptible to man-in-the-middle attacks.  SSL

    certificates can be installed to /etc/openldap/cacerts so that the

    DEMAND or HARD options can be used with self-signed certificates or

    certificates that do not have traceable certificates of authority.

    NEVER

        A serve certificate will never be requested or checked.

    ALLOW

        A server certificate is requested.  Failure to provide a

        certificate or providing a bad certificate will not terminate the

        session.

    TRY

        A server certificate is requested.  Failure to provide a

        certificate does not halt the session; providing a bad certificate

        halts the session.

    DEMAND

        A server certificate is requested and must be provided and