#    ChangesetController:changeset_raw,

#    FilesController:raw,

#    FilesController:archivefile

## default encoding used to convert from and to unicode

## can be also a comma seperated list of encoding in case of mixed encodings

default_encoding = utf8

## issue tracker for Kallithea (leave blank to disable, absent for default)

#bugtracker = https://bitbucket.org/conservancy/kallithea/issues

## issue tracking mapping for commits messages

## comment out issue_pat, issue_server, issue_prefix to enable

## pattern to get the issues from commit messages

## default one used here is #<numbers> with a regex passive group for `#`

## {id} will be all groups matched from this pattern

issue_pat = (?:\s*#)(\d+)

## server url to the issue, each {id} will be replaced with match

## fetched from the regex and {repo} is replaced with full repository name

## including groups {repo_name} is replaced with just name of repo

issue_server_link = https://myissueserver.com/{repo}/issue/{id}

## prefix to add to link to indicate it's an url

## #314 will be replaced by <issue_prefix><id>

issue_prefix = #

## issue_pat, issue_server_link, issue_prefix can have suffixes to specify

## multiple patterns, to other issues server, wiki or others

## below an example how to create a wiki pattern

# wiki-some-id -> https://mywiki.com/some-id

#issue_pat_wiki = (?:wiki-)(.+)

#issue_server_link_wiki = https://mywiki.com/{id}

#issue_prefix_wiki = WIKI-

## instance-id prefix

## a prefix key for this instance used for cache invalidation when running

## multiple instances of kallithea, make sure it's globally unique for

## all running kallithea instances. Leave empty if you don't use it

instance_id =

## alternative return HTTP header for failed authentication. Default HTTP

## handling that. Set this variable to 403 to return HTTPForbidden

auth_ret_code =

## locking return code. When repository is locked return this HTTP code. 2XX

## codes don't break the transactions while 4XX codes do

lock_ret_code = 423

## allows to change the repository location in settings page

allow_repo_location_change = True

## allows to setup custom hooks in settings page

allow_custom_hooks_settings = True

####################################

###        CELERY CONFIG        ####

####################################

use_celery = false

broker.host = localhost

broker.vhost = rabbitmqhost

broker.port = 5672

broker.user = rabbitmq

broker.password = qweqwe

celery.imports = kallithea.lib.celerylib.tasks

celery.result.backend = amqp

celery.result.dburi = amqp://

celery.result.serialier = json

#celery.send.task.error.emails = true

#celery.amqp.task.result.expires = 18000

celeryd.concurrency = 2

#celeryd.log.file = celeryd.log

celeryd.log.level = debug

celeryd.max.tasks.per.child = 1

## tasks will never be sent to the queue, but executed locally instead.

celery.always.eager = false

####################################

###         BEAKER CACHE        ####

####################################

beaker.cache.data_dir=%(here)s/data/cache/data

beaker.cache.lock_dir=%(here)s/data/cache/lock

#    ChangesetController:changeset_raw,

#    FilesController:raw,

#    FilesController:archivefile

<%text>## default encoding used to convert from and to unicode</%text>

<%text>## can be also a comma seperated list of encoding in case of mixed encodings</%text>

default_encoding = utf8

<%text>## issue tracker for Kallithea (leave blank to disable, absent for default)</%text>

#bugtracker = https://bitbucket.org/conservancy/kallithea/issues

<%text>## issue tracking mapping for commits messages</%text>

<%text>## comment out issue_pat, issue_server, issue_prefix to enable</%text>

<%text>## pattern to get the issues from commit messages</%text>

<%text>## default one used here is #<numbers> with a regex passive group for `#`</%text>

<%text>## {id} will be all groups matched from this pattern</%text>

issue_pat = (?:\s*#)(\d+)

<%text>## server url to the issue, each {id} will be replaced with match</%text>

<%text>## fetched from the regex and {repo} is replaced with full repository name</%text>

<%text>## including groups {repo_name} is replaced with just name of repo</%text>

issue_server_link = https://myissueserver.com/{repo}/issue/{id}

<%text>## prefix to add to link to indicate it's an url</%text>

<%text>## #314 will be replaced by <issue_prefix><id></%text>

issue_prefix = #

<%text>## issue_pat, issue_server_link, issue_prefix can have suffixes to specify</%text>

<%text>## multiple patterns, to other issues server, wiki or others</%text>

<%text>## below an example how to create a wiki pattern</%text>

# wiki-some-id -> https://mywiki.com/some-id

#issue_pat_wiki = (?:wiki-)(.+)

#issue_server_link_wiki = https://mywiki.com/{id}

#issue_prefix_wiki = WIKI-

<%text>## instance-id prefix</%text>

<%text>## a prefix key for this instance used for cache invalidation when running</%text>

<%text>## multiple instances of kallithea, make sure it's globally unique for</%text>

<%text>## all running kallithea instances. Leave empty if you don't use it</%text>

instance_id =

<%text>## alternative return HTTP header for failed authentication. Default HTTP</%text>

<%text>## handling that. Set this variable to 403 to return HTTPForbidden</%text>

auth_ret_code =

<%text>## locking return code. When repository is locked return this HTTP code. 2XX</%text>

<%text>## codes don't break the transactions while 4XX codes do</%text>

lock_ret_code = 423

<%text>## allows to change the repository location in settings page</%text>

allow_repo_location_change = True

<%text>## allows to setup custom hooks in settings page</%text>

allow_custom_hooks_settings = True

<%text>

####################################

###        CELERY CONFIG        ####

####################################

</%text>

use_celery = false

broker.host = localhost

broker.vhost = rabbitmqhost

broker.port = 5672

broker.user = rabbitmq

broker.password = qweqwe

celery.imports = kallithea.lib.celerylib.tasks

celery.result.backend = amqp

celery.result.dburi = amqp://

celery.result.serialier = json

#celery.send.task.error.emails = true

#celery.amqp.task.result.expires = 18000

celeryd.concurrency = 2

#celeryd.log.file = celeryd.log

celeryd.log.level = debug

celeryd.max.tasks.per.child = 1

<%text>## tasks will never be sent to the queue, but executed locally instead.</%text>

celery.always.eager = false

<%text>

####################################

###         BEAKER CACHE        ####

####################################

</%text>

beaker.cache.data_dir=${here}/data/cache/data

beaker.cache.lock_dir=${here}/data/cache/lock

#    ChangesetController:changeset_raw,

#    FilesController:raw,

#    FilesController:archivefile

## default encoding used to convert from and to unicode

## can be also a comma seperated list of encoding in case of mixed encodings

default_encoding = utf8

## issue tracker for Kallithea (leave blank to disable, absent for default)

#bugtracker = https://bitbucket.org/conservancy/kallithea/issues

## issue tracking mapping for commits messages

## comment out issue_pat, issue_server, issue_prefix to enable

## pattern to get the issues from commit messages

## default one used here is #<numbers> with a regex passive group for `#`

## {id} will be all groups matched from this pattern

issue_pat = (?:\s*#)(\d+)

## server url to the issue, each {id} will be replaced with match

## fetched from the regex and {repo} is replaced with full repository name

## including groups {repo_name} is replaced with just name of repo

issue_server_link = https://myissueserver.com/{repo}/issue/{id}

## prefix to add to link to indicate it's an url

## #314 will be replaced by <issue_prefix><id>

issue_prefix = #

## issue_pat, issue_server_link, issue_prefix can have suffixes to specify

## multiple patterns, to other issues server, wiki or others

## below an example how to create a wiki pattern

# wiki-some-id -> https://mywiki.com/some-id

#issue_pat_wiki = (?:wiki-)(.+)

#issue_server_link_wiki = https://mywiki.com/{id}

#issue_prefix_wiki = WIKI-

## instance-id prefix

## a prefix key for this instance used for cache invalidation when running

## multiple instances of kallithea, make sure it's globally unique for

## all running kallithea instances. Leave empty if you don't use it

instance_id =

## alternative return HTTP header for failed authentication. Default HTTP

## handling that. Set this variable to 403 to return HTTPForbidden

auth_ret_code =

## locking return code. When repository is locked return this HTTP code. 2XX

## codes don't break the transactions while 4XX codes do

lock_ret_code = 423

## allows to change the repository location in settings page

allow_repo_location_change = True

## allows to setup custom hooks in settings page

allow_custom_hooks_settings = True

####################################

###        CELERY CONFIG        ####

####################################

use_celery = false

broker.host = localhost

broker.vhost = rabbitmqhost

broker.port = 5672

broker.user = rabbitmq

broker.password = qweqwe

celery.imports = kallithea.lib.celerylib.tasks

celery.result.backend = amqp

celery.result.dburi = amqp://

celery.result.serialier = json

#celery.send.task.error.emails = true

#celery.amqp.task.result.expires = 18000

celeryd.concurrency = 2

#celeryd.log.file = celeryd.log

celeryd.log.level = debug

celeryd.max.tasks.per.child = 1

## tasks will never be sent to the queue, but executed locally instead.

celery.always.eager = false

####################################

###         BEAKER CACHE        ####

####################################

beaker.cache.data_dir=%(here)s/data/cache/data

beaker.cache.lock_dir=%(here)s/data/cache/lock

                if c.repo_name:

                    cur_query = u'repository:%s %s' % (c.repo_name, cur_query)

                try:

                    query = qp.parse(unicode(cur_query))

                    # extract words for highlight

                    if isinstance(query, Phrase):

                        highlight_items.update(query.words)

                    elif isinstance(query, Prefix):

                        highlight_items.add(query.text)

                    else:

                        for i in query.all_terms():

                            if i[0] in ['content', 'message']:

                                highlight_items.add(i[1])

                    matcher = query.matcher(searcher)

                    log.debug('query: %s' % query)

                    log.debug('hl terms: %s' % highlight_items)

                    results = searcher.search(query)

                    res_ln = len(results)

                    c.runtime = '%s results (%.3f seconds)' % (

                        res_ln, results.runtime

                    )

                    def url_generator(**kw):

                        q = urllib.quote(safe_str(c.cur_query))

                        return update_params("?q=%s&type=%s" \

                        % (q, safe_str(c.cur_type)), **kw)

                    repo_location = RepoModel().repos_path

                    c.formated_results = Page(

                        WhooshResultWrapper(search_type, searcher, matcher,

                                            highlight_items, repo_location),

                        page=p,

                        item_count=res_ln,

                        items_per_page=10,

                        url=url_generator

                    )

                except QueryParserError:

                    c.runtime = _('Invalid search query. Try quoting it.')

                searcher.close()

            except (EmptyIndexError, IOError):

                log.error(traceback.format_exc())

                log.error('Empty Index data')

                c.runtime = _('There is no index to search in. '

                              'Please run whoosh indexer')

            except (Exception):

                log.error(traceback.format_exc())

        # Return a rendered template

        return render('/search/search.html')

# GNU General Public License for more details.

#

# You should have received a copy of the GNU General Public License

# along with this program.  If not, see <http://www.gnu.org/licenses/>.

"""

kallithea.lib.middleware.simplegit

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

SimpleGit middleware for handling git protocol request (push/clone etc.)

It's implemented with basic auth function

This file was forked by the Kallithea project in July 2014.

Original author and date, and relevant copyright and licensing information is below:

:created_on: Apr 28, 2010

:author: marcink

:copyright: (c) 2013 RhodeCode GmbH, and others.

:license: GPLv3, see LICENSE.md for more details.

"""

import os

import re

import logging

import traceback

from paste.httpheaders import REMOTE_USER, AUTH_TYPE

from webob.exc import HTTPNotFound, HTTPForbidden, HTTPInternalServerError, \

    HTTPNotAcceptable

from kallithea.model.db import User, Ui

from kallithea.lib.utils2 import safe_str, fix_PATH, get_server_url,\

    _set_extras

from kallithea.lib.base import BaseVCSController

from kallithea.lib.utils import make_ui, is_valid_repo

from kallithea.lib.exceptions import HTTPLockedRC

from kallithea.lib.hooks import pre_pull

from kallithea.lib import auth_modules

log = logging.getLogger(__name__)

GIT_PROTO_PAT = re.compile(r'^/(.+)/(info/refs|git-upload-pack|git-receive-pack)')

def is_git(environ):

    path_info = environ['PATH_INFO']

    isgit_path = GIT_PROTO_PAT.match(path_info)

        path_info, isgit_path is not None)

    )

    return isgit_path

class SimpleGit(BaseVCSController):

    def _handle_request(self, environ, start_response):

        if not is_git(environ):

            return self.application(environ, start_response)

        if not self._check_ssl(environ):

            return HTTPNotAcceptable('SSL REQUIRED !')(environ, start_response)

        ip_addr = self._get_ip_addr(environ)

        username = None

        self._git_first_op = False

        # skip passing error to error controller

        environ['pylons.status_code_redirect'] = True

        #======================================================================

        # EXTRACT REPOSITORY NAME FROM ENV

        #======================================================================

        try:

            repo_name = self.__get_repository(environ)

            log.debug('Extracted repo name is %s' % repo_name)

        except Exception:

            return HTTPInternalServerError()(environ, start_response)

        # quick check if that dir exists...

        if not is_valid_repo(repo_name, self.basepath, 'git'):

            return HTTPNotFound()(environ, start_response)

        #======================================================================

        # GET ACTION PULL or PUSH

        #======================================================================

        action = self.__get_action(environ)

        #======================================================================

        # CHECK ANONYMOUS PERMISSION

        #======================================================================

        if action in ['pull', 'push']:

            anonymous_user = self.__get_user('default')

            username = anonymous_user.username

            if anonymous_user.active:

                # ONLY check permissions if the user is activated

                anonymous_perm = self._check_permission(action, anonymous_user,

                                                        repo_name, ip_addr)

            else:

                #check permissions for this repository

                perm = self._check_permission(action, user, repo_name, ip_addr)

                if not perm:

                    return HTTPForbidden()(environ, start_response)

        # extras are injected into UI object and later available

        # in hooks executed by kallithea

        from kallithea import CONFIG

        server_url = get_server_url(environ)

        extras = {

            'ip': ip_addr,

            'username': username,

            'action': action,

            'repository': repo_name,

            'scm': 'git',

            'config': CONFIG['__file__'],

            'server_url': server_url,

            'make_lock': None,

            'locked_by': [None, None]

        }

        #===================================================================

        # GIT REQUEST HANDLING

        #===================================================================

        str_repo_name = safe_str(repo_name)

        repo_path = os.path.join(safe_str(self.basepath),str_repo_name)

        log.debug('Repository path is %s' % repo_path)

        # CHECK LOCKING only if it's not ANONYMOUS USER

        if username != User.DEFAULT_USER:

            log.debug('Checking locking on repository')

            (make_lock,

             locked,

             locked_by) = self._check_locking_state(

                            environ=environ, action=action,

                            repo=repo_name, user_id=user.user_id

                       )

            # store the make_lock for later evaluation in hooks

            extras.update({'make_lock': make_lock,

                           'locked_by': locked_by})

        fix_PATH()

        log.debug('HOOKS extras is %s' % extras)

        baseui = make_ui('db')

        self.__inject_extras(repo_path, baseui, extras)

        try:

            self._handle_githooks(repo_name, action, baseui, environ)

                     (action, str_repo_name, safe_str(username), ip_addr))

            app = self.__make_app(repo_name, repo_path, extras)

            return app(environ, start_response)

        except HTTPLockedRC, e:

            _code = CONFIG.get('lock_ret_code')

            log.debug('Repository LOCKED ret code %s!' % (_code))

            return e(environ, start_response)

        except Exception:

            log.error(traceback.format_exc())

            return HTTPInternalServerError()(environ, start_response)

        finally:

            # invalidate cache on push

            if action == 'push':

                self._invalidate_cache(repo_name)

    def __make_app(self, repo_name, repo_path, extras):

        """

        Make an wsgi application using dulserver

        :param repo_name: name of the repository

        :param repo_path: full path to the repository

        """

        from kallithea.lib.middleware.pygrack import make_wsgi_app

        app = make_wsgi_app(

            repo_root=safe_str(self.basepath),

            repo_name=repo_name,

            extras=extras,

        )

        return app

    def __get_repository(self, environ):

        """

        Gets repository name out of PATH_INFO header

        :param environ: environ where PATH_INFO is stored

        """

        try:

            environ['PATH_INFO'] = self._get_by_id(environ['PATH_INFO'])

            repo_name = GIT_PROTO_PAT.match(environ['PATH_INFO']).group(1)

        except Exception:

            log.error(traceback.format_exc())

            raise

        return repo_name

    def __get_user(self, username):

        return User.get_by_username(username)

# -*- coding: utf-8 -*-

# This program is free software: you can redistribute it and/or modify

# it under the terms of the GNU General Public License as published by

# the Free Software Foundation, either version 3 of the License, or

# (at your option) any later version.

#

# This program is distributed in the hope that it will be useful,

# but WITHOUT ANY WARRANTY; without even the implied warranty of

# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

# GNU General Public License for more details.

#

# You should have received a copy of the GNU General Public License

# along with this program.  If not, see <http://www.gnu.org/licenses/>.

"""

kallithea.lib.middleware.simplehg

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

(push/clone etc.). It's implemented with basic auth function

This file was forked by the Kallithea project in July 2014.

Original author and date, and relevant copyright and licensing information is below:

:created_on: Apr 28, 2010

:author: marcink

:copyright: (c) 2013 RhodeCode GmbH, and others.

:license: GPLv3, see LICENSE.md for more details.

"""

import os

import logging

import traceback

from paste.httpheaders import REMOTE_USER, AUTH_TYPE

from webob.exc import HTTPNotFound, HTTPForbidden, HTTPInternalServerError, \

    HTTPNotAcceptable

from kallithea.model.db import User

from kallithea.lib.utils2 import safe_str, fix_PATH, get_server_url,\

    _set_extras

from kallithea.lib.base import BaseVCSController

from kallithea.lib.utils import make_ui, is_valid_repo, ui_sections

from kallithea.lib.vcs.utils.hgcompat import RepoError, hgweb_mod

from kallithea.lib.exceptions import HTTPLockedRC

from kallithea.lib import auth_modules

log = logging.getLogger(__name__)

def is_mercurial(environ):

    """

    Returns True if request's target is mercurial server - header

    ``HTTP_ACCEPT`` of such request would start with ``application/mercurial``.

    """

    http_accept = environ.get('HTTP_ACCEPT')

    path_info = environ['PATH_INFO']

    if http_accept and http_accept.startswith('application/mercurial'):

        ishg_path = True

    else:

        ishg_path = False

        path_info, ishg_path)

    )

    return ishg_path

class SimpleHg(BaseVCSController):

    def _handle_request(self, environ, start_response):

        if not is_mercurial(environ):

            return self.application(environ, start_response)

        if not self._check_ssl(environ):

            return HTTPNotAcceptable('SSL REQUIRED !')(environ, start_response)

        ip_addr = self._get_ip_addr(environ)

        username = None

        # skip passing error to error controller

        environ['pylons.status_code_redirect'] = True

        #======================================================================

        # EXTRACT REPOSITORY NAME FROM ENV

        #======================================================================

        try:

            repo_name = environ['REPO_NAME'] = self.__get_repository(environ)

            log.debug('Extracted repo name is %s' % repo_name)

        except Exception:

            return HTTPInternalServerError()(environ, start_response)

        # quick check if that dir exists...

        if not is_valid_repo(repo_name, self.basepath, 'hg'):

            return HTTPNotFound()(environ, start_response)

        #======================================================================

        # GET ACTION PULL or PUSH

        #======================================================================

        action = self.__get_action(environ)

        #======================================================================

        # CHECK ANONYMOUS PERMISSION

        #======================================================================

        if action in ['pull', 'push']:

            anonymous_user = self.__get_user('default')

            username = anonymous_user.username

            if anonymous_user.active:

                # ONLY check permissions if the user is activated

                anonymous_perm = self._check_permission(action, anonymous_user,

                                                        repo_name, ip_addr)

            else:

                anonymous_perm = False

                    return HTTPInternalServerError()(environ, start_response)

                #check permissions for this repository

                perm = self._check_permission(action, user, repo_name, ip_addr)

                if not perm:

                    return HTTPForbidden()(environ, start_response)

        # extras are injected into mercurial UI object and later available

        # in hg hooks executed by kallithea

        from kallithea import CONFIG

        server_url = get_server_url(environ)

        extras = {

            'ip': ip_addr,

            'username': username,

            'action': action,

            'repository': repo_name,

            'scm': 'hg',

            'config': CONFIG['__file__'],

            'server_url': server_url,

            'make_lock': None,

            'locked_by': [None, None]

        }

        #======================================================================

        # MERCURIAL REQUEST HANDLING

        #======================================================================

        str_repo_name = safe_str(repo_name)

        repo_path = os.path.join(safe_str(self.basepath), str_repo_name)

        log.debug('Repository path is %s' % repo_path)

        # CHECK LOCKING only if it's not ANONYMOUS USER

        if username != User.DEFAULT_USER:

            log.debug('Checking locking on repository')

            (make_lock,

             locked,

             locked_by) = self._check_locking_state(

                            environ=environ, action=action,

                            repo=repo_name, user_id=user.user_id

                       )

            # store the make_lock for later evaluation in hooks

            extras.update({'make_lock': make_lock,

                           'locked_by': locked_by})

        fix_PATH()

        log.debug('HOOKS extras is %s' % extras)

        baseui = make_ui('db')

        self.__inject_extras(repo_path, baseui, extras)

        try:

                     (action, str_repo_name, safe_str(username), ip_addr))

            app = self.__make_app(repo_path, baseui, extras)

            return app(environ, start_response)

        except RepoError, e:

            if str(e).find('not found') != -1:

                return HTTPNotFound()(environ, start_response)

        except HTTPLockedRC, e:

            _code = CONFIG.get('lock_ret_code')

            log.debug('Repository LOCKED ret code %s!' % (_code))

            return e(environ, start_response)

        except Exception:

            log.error(traceback.format_exc())

            return HTTPInternalServerError()(environ, start_response)

        finally:

            # invalidate cache on push

            if action == 'push':

                self._invalidate_cache(repo_name)

    def __make_app(self, repo_name, baseui, extras):

        """

        Make an wsgi application using hgweb, and inject generated baseui

        instance, additionally inject some extras into ui object

        """

        return hgweb_mod.hgweb(repo_name, name=repo_name, baseui=baseui)

    def __get_repository(self, environ):

        """

        Gets repository name out of PATH_INFO header

        :param environ: environ where PATH_INFO is stored

        """

        try:

            environ['PATH_INFO'] = self._get_by_id(environ['PATH_INFO'])

            repo_name = '/'.join(environ['PATH_INFO'].split('/')[1:])

            if repo_name.endswith('/'):

                repo_name = repo_name.rstrip('/')

        except Exception:

            log.error(traceback.format_exc())

            raise

        return repo_name

    def __get_user(self, username):

        return User.get_by_username(username)

    def __get_action(self, environ):

        """

        Maps mercurial request commands into a clone,pull or push command.

    def _init_session(self):

        """

        Inits SqlAlchemy Session

        """

        logging.config.fileConfig(self.path_to_ini_file)

        from pylons import config

        from kallithea.model import init_model

        from kallithea.lib.utils2 import engine_from_config

        #get to remove repos !!

        add_cache(config)

        engine = engine_from_config(config, 'sqlalchemy.db1.')

        init_model(engine)

def check_git_version():

    """

    Checks what version of git is installed in system, and issues a warning

    if it's too old for Kallithea to properly work.

    """

    from kallithea import BACKENDS

    from kallithea.lib.vcs.backends.git.repository import GitRepository

    from kallithea.lib.vcs.conf import settings

    from distutils.version import StrictVersion

    if 'git' not in BACKENDS:

        return None

    stdout, stderr = GitRepository._run_git_command('--version', _bare=True,

                                                    _safe=True)

    ver = (stdout.split(' ')[-1] or '').strip() or '0.0.0'

    if len(ver.split('.')) > 3:

        #StrictVersion needs to be only 3 element type

        ver = '.'.join(ver.split('.')[:3])